Vertical 3-TIE BAR Rotary Injection Machine
Vertical 3-TIE BAR Rotary Injection Machine
FEATURES
Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding.
With double slide table or rotary design, put-in, take-out products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.
High precision mold platen ( Parralelism/ flatness : 0.01/100mm), heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life.
Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.
Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.
All series adapted Variable pump +PQ valves enable energy savings of 30~50%.
Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
Low oil temperature, durable parts, high speed injection, and quiet operation.
Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.
All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.
Video List
K360-110-25DVR-1 Rotate Table Motion-1 Video
K360-110-25DVR-1 Rotate Table Motion-2 Video
K360-110-25DVR-1 Rotate Table Motion-3 Video
K410-110-40DVR-1-PART1 Video
K410-110-40DVR-1-PART2 Video
K40-40 Double Injection With Rotary Table For DC Power Cord Video

VIMM (TIE BARLESS)
MODEL K75-10DV-1 K360-110-25DV-1 K410-180-40DV-1
Inj sys
Screw Diameter mm 24 28 30 22 28 34 26 32 40
Injection Pressure kgf/cm² 1960 1440 1250 2330 1800 970 2330 1540 980
Injection Capacity cm³ 38 52 60 46 74 110 74 113 176
Injection Weight (PS) oz 1.56 2.1 2.4 1.9 3 4.4 3 4.6 7.1
Injection Rate cc/s. 27 37 42 31 50 74 51 77 120
Clamping sys
Clamping Force tf 10 25 40
Clamping Stroke mm 200
Max. Mould Space mm 235 400
Min. Mold Height mm 35 200
Overall Size of Platens (H*V) mm 440*220 500*290 560*300
Space Between Columns (H*V) mm 300 360*150 410*150
Ejector Force tf 0.7 (2.7) 0.7 (2.7) 0.9 (2.7)
Ejector Stroke mm 21 (40) 25 (40) 40 (40)
Platen Moving sys
Moving Type N/A Rotary Rotary Rotary
Moving Plate Stroke mm 220 300 300
Size of Moving Plate (H*V / DIA) mm ø600 ø780 ø880
Stations sets 2~4 2~4 2~4
Others
Drive Motor (with Variable pump) kw(HP) 3(4HP) 3.7 (5HP) 5.5 (7.5HP)
Heater kw 3.4 3.4 5.6
Dimension of Machine (L*W*H) m 1.1 * 0.9 * 2.3 1.1 * 1.5 * 2.3 1.1* 1.5 * 2.3 1.6 * 1.2 * 2.7 1.6 * 1.5 * 2.8 1.7 * 1.6 * 2.8 1.8 * 1.4 * 3.0 1.8 * 1.7 * 3.1 1.9 * 1.8 * 3.1
Weight of Machine t 0.6 0.8 1 1 1.2 1.4 1.6 1.7 2

MODEL K460-250-55DV-1 K520-250-80DV-1 K220-100DVR-1-S60
Inj sys
Screw Diameter mm 31 38 44 30
Injection Pressure kgf/cm² 2471 1630 1210 0
Injection Capacity cm³ 106 159 213 99
Injection Weight (PS) oz 4.3 6.4 8.6 6.2
Injection Rate cc/s. 48 72 97 -
Clamping sys
Clamping Force tf 55 80 120
Clamping Stroke mm 200 250
Max. Mould Space mm 400 600
Min. Mold Height mm 200 -
Overall Size of Platens (H*V) mm 610*400 700*560 -
Space Between Columns (H*V) mm 460*240 520*300 -
Ejector Force tf 0.9 (2.7) 0.9 (2.7) 4
Ejector Stroke mm 40 (40) 50 (50) 160
Platen Moving sys
Moving Type N/A Rotary Rotary -
Moving Plate Stroke mm 350 350 -
Size of Moving Plate (H*V / DIA) mm ø980 ø1200 -
Stations sets 2~4 2~4 2
Others
Drive Motor (with Variable pump) kw(HP) 6 (8HP) 6 (8HP) 15
Heater kw 6 6 9
Dimension of Machine (L*W*H) m 2.0 * 1.6 * 3.2 2.0 * 1.9 * 3.3 2.1 * 1.9 * 3.3 2.2 * 1.8 * 3.4 2.2 * 2.1 * 3.5 2.4 * 2.4 * 3.5 2.6 * 1.5 * 3.5
Weight of Machine t 2 2.3 2.7 2.2 2.6 3.2 6

Standard Equipment List
Clamping Unit Low pressure protection for clamping
Control Controller (IPC / Single chip with double CPU)
Hydraulic Unit Varlable pumps + PQ valve
Injection Unit Multi-stage injection control
Nozzle forward position to confirm
Others Auto purge
Return Oil filter device
Over-heat protection for oil & plastic
Cooling system

Options List
Clamping Unit Shuttle table
Rotary table (Hydraulic / Sevo-motor)
Core device
Electric eye & Light curtain safety device
Air blow of mold
Pressure sensor
Injection Unit Bi-metal screw & barrel / Nitroflon surface trearment
Shut-off nozzle
Ceramics heater band
Others Chiller
Mold temperature controller
Warm up function for hydraulic oil
Dehumidifying dryer
Automatic vacuum loaders
Hoper dryer
Robot & Automatic device
Top